Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools/Maintenance

All-City Utility Folding Knife
$39.99
Everybody needs a good knife in their backpack or tool kit. Here's a favorite of the All-City team, made by the fine folks at CRKT. It's got a clip on one side, the AC logo on the other, and is good for spreading delicious jams, making dangerous arm movements, and of course, cutting things. - Open length: 6.5-inches - Closed length: 3.75-inches - Blade length: 2.625-inches - Weight: 3.1-ounces - Blade material: Stainless Steel - Edge type: fine - Handle material: steel - Knife type: locking folder
Alligator Shimano Reservoir Bleed Fitting
$9.90
- Replaces original Shimano bleed fitting with easy to use lever reservoir bleed fitting
Alligator Quick Bleed
$15.94
- Internal valve prevents air from being drawn into the system - Includes one Quick Bleed valve and 2 sections of bleed tubing
Alligator Universal Disc Brake Bleed Kit
$63.90
- Features bleed fittings for Hope, Magura, Avid, Hayes, Formula and Gatorbrake - Includes bleed tubes, syringes, gloves, and handy carrying case - See BTI part number AX-9617 for Shimano bleed fitting
Alligator Big Jaw Crimper
$107.90
- Shop grade tool crimps cable end caps and 4/5/6mm housing ferrules
Atomlab Torque Nipple Tools
$3.90
- T-20 Torx L-wrench for pre-tensioning Torque nipples - 4.3mm wrench for tensioning Torque nipples via their wrench flats
Avid Elixir Pad Spreader Tool
$4.00
Brake pad spreader tool for Avid Elixir brakes.
Avid X0 Trail Pad Spreader Tool
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
Avid DOT Assembly Grease
$12.00
Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.
Avid DOT 5.1 Brake Fluid
$15.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
Avid XX / Elixir Brake Lever Pivot Pin Press Tool
$27.00
- For removing/installing lever pivot pins in 2009/2010 XX and Elixir brake levers (2011+ brakes do not require pin tool)
Avid Disc Brake Bleed Kit
$41.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has the tools you need. Keep your Avid Juicy, Code, Guide or Elixir hydraulic discs running strong. Please note, DOT 5.1 brake fluid not included.
Avid Hydraulic Hose Cutter Tool
$51.00
- Hand-held hydraulic hose cutter - Quick, precise cuts - Works with all non-braided hydraulic hoses
Avid Disc Brake Bleed Kit
$53.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong.
Avid CODE Disc Brake Lever Parts 2007-2010
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
Avid Pro Brake Bleed Kit
$88.00
SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
Avid Professional Disc Brake Bleed Kit
$88.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has the tools you need. This pro version is designed to stand up to heavy use with high-volume syringes and steel fittings. Keep your Avid Juicy, Code or Elixir hydraulic discs, or SRAM hydraulics running strong. Please note, DOT 5.1 brake fluid not included.
Avid Professional Disc Brake Bleed Kit
$98.00
Periodic brake bleeds are necessary to maintain consistent stopping performance, and Avid's Professional Disc Brake Bleed Kit has everything you need to keep your Avid Juicy, Code or Elixir hydraulic discs running strong. And, this pro version is designed to stand up to heavy use with high-volume syringes and steel fittings.
Bahco Hacksaws
$59.94 - $67.90
- Professional Ergo: features an ergonomic design with a high blade tension for straight accurate cuts (accepts 12" blade only). Alternative 55 degree blade mounting for flush cutting. Single touch spring loaded blade release mechanism for blade changes.
Blackburn Toolmanator 5
$14.99
- Lightweight, slim profile slips inside your pocket - Extra-rigid one-piece aluminum frame - One-piece aluminum frame & ultra-slim design - Hardened, forged and drawn chrome vanadium bits - Compact and superlight - Hardened, forged and drawn chrome vanadium tool bits - 3mm, 4mm, 5mm, 6mm Hex Keys & flat head screwdriver - 44g
Blackburn Heist 10
$24.99
• 10-function multi-tool • Aluminum frame • High strength chrome vanadium steel tools: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm and 8mm Hex Keys, Torx T25, Philips, and bladed Screwdriver • 145g
Blackburn Toolmanator 16
$44.99
- Only mini-tool available with a shock pump - Neoprene sleeve saves wear on jersey pockets - Hardened, forged and drawn chrome vanadium tool bits - 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm and 8mm Hex Keys, Torx T25 and T30, Schrader Valve adjuster, bladed and Philips #2 screwdrivers, 10s chain breaker, and 14/15 gauge spoke wrenches - 144g
Boeshield T-9 Lubricant
$3.99 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Brooks Proofide Saddle Dressing
$11.99
Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.
Brooks Wheel Kit
$30.00
Brooks' Wheel Kit includes all you need to take care of your bicycle’s wheels: three tire levers made of chromium-coated, high-quality carbon steel with spoke holding notches, and one dual-size 3.3/3.4mm spoke wrench made of titanium-coated stainless steel.
Brooks Brooks Saddle Maintenance Kit
$200.00
Each Brooks Saddle comes with a care leaflet. Maintaining your saddle, as described therein, will ensure that it becomes the most comfortable and durable saddle you could ever wish for. The maintenance kit includes all you need to take care of your Brooks Saddle: a can of Proofide leather dressing, a cotton cloth to polish the saddle and a Brooks Spanner. Please note that the standard spanner works on most models with the exception of the Swallow Titanium, which has its own specific spanner, and the Swift Titanium, which can be tensioned with an allen key.
Buzzy's Slick Honey Bike Grease
$12.99 - $39.99
Buzzy's Slick Honey has a superior ability to reduce sliding friction, making it ideal for lubricating o-rings, seals, bushings, and any other sliding or pivoting parts. Try it on your bike and you'll see why major suspension fork manufacturers like Rock Shox, Fox Racing and White Brothers use Slick Honey in their service departments.
Buzzy's Shock Nectar Shock Oil
$19.99 - $39.99
Buzzy's Shock Nectar shock oil comes in 3 different weights to match the most popular suspension fork setups. Mix different weights together for a truly personalized ride.
CDI Torque Products Preset Torque T-Handles
$39.16
- Prevent over-tightening of bolts to protect carbon fiber and other parts at critical junctions (Bar/Stem, Stem/Steer tube, Frame/Seat post) - 4mm bit is included with magnetic shank to interchange bits as needed - Rounded t-handle grip for added comfort in three different colors for easy identification - Includes certificate of calibration
CDI Torque Products Torqcontrol Torque Tool
$79.99
- Prevent over-tightening of bolts to protect carbon fiber and other parts at critical junctions (Bar/Stem; Stem/Steer tube; Frame/Seat post) - Adjustable from 2nm to 8nm indexing at every 0.1 (Tenth) of a newton meter - 1/4" Hex magnetic bit shank with 6 bits - Positive grip l-Handle design - Includes 4, 5, 6mm, T25 at 1" length and 4mm, T25 at 4" length
CDI Torque Products Torque Wrenches
$174.93 - $190.33
- Easy-to-read precision laser marked scales - Dual scales in English or Newton Meter units - An audible click indicates when the desired torque has been reached - All click torque wrenches are calibrated for use in both directions - Accuracy: +/- 4% cloc
CDI Torque Products Digital Torque Wrench
$413.03
- Digital readout torque wrench that displays real time torque values in any of four units (ft. lbs, in. lbs, Nm, kg.cm.) - Large easy to read digital display - 15 degree flex ratcheting push button socket release head that torques in both clockwise and counter-clockwise directions - Audible tone sounds when set torque value is reached, if the set torque value is exceeded, an alarm tone will sound - 3 color LED light bar: yellow indicates approaching desired torque setting, green indicates desired torque value is reached, red indicates fastener was overtorqued - Accuracy: +/-2% CW of readings from 20% to 100% of full scale +/- 3% CCW of readings from 20% to 100% of full scale - N.I.S.T. traceable Certificate of Calibration included - Two CR123 Lithium batteries included
Campagnolo Disk Brake Mineral Oil
$15.00 - $40.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
Campagnolo Ultra-Torque Hex Tool
$23.00
- Tool for removal and installation of the Ultra-Torque bolt - Fits 10mm Ultra-Torque bolts on all Campagnolo Ultra-Torque cranks
Campagnolo Disc Brake Bleeding Kit
$44.00
Contains the fittings and syringes needed for bleeding Campagnolo disc brakes -Does not include mineral oil - Fits Brand: Campagnolo - Hydraulic Fluid Type: Mineral Oil
Campagnolo Ultra-Torque Bottom Bracket Tool
$47.00
- Designed specifically to install and/or remove Campagnolo Ultra-Torque bottom bracket cups - Allows use of a Torque wrench to obtain proper torque specifications
Cane Creek Double Barrel Adjustment Tool
$12.00
- Collar spanner, Nut wrenches and bottle opener for double barrel rear shocks
Cane Creek DB Bushing Hardware Tool - Assembly
$22.00
Allows safe installation and removal of Cane Creek Double Barrel bushings.
Cannondale SI BB Bearing Removal Tool
$11.00
- Tool required when removing Cannondale System Integrated, BB30, bearings - T-shaped tool for bearing removal
Cannondale Lefty Wheel Truing Dummy Axle
$30.00
- Wheel truing dummy axle and cap for Cannondale lefty forks
Cannondale SI Crank Arm Removal Tool
$60.00
- Tool required when removing Cannondale System Integrated, BB30 crank arms - Two piece tool for pressing arms away from the BB spindle
Cobra Products Cable Tie Application And Removal Tool
$49.99
- Cable Tie Gun quickly tensions and cuts off excess strap without leaving a sharp protrusion that can cause snags, cuts, and abrasions to cables - Automatically cuts off excess strap when the selected tension setting is achieved and saves installation time with one easy pull of the trigger
Crank Brothers Speedier Lever
$7.19 - $192.00
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Crank Brothers M5
$12.99
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime
Crank Brothers m10
$19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
Crank Brothers m17
$27.00
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime
Crank Brothers B14-Bit Multi-Tool
$27.99
Crank Brothers' B14-Bit Multi-Tool has a stainless steel frame with fourteen common tools needed for road and trail repairs: 2 flat and 2 Phillips screwdrivers, 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm Allen wrenches, and a T10 and a T25 Torx head. It uses a magnetized bit socket that keeps the bit firmly in place. The bit holder locks closed, so everything's there when you need it!
Crank Brothers F10 Multi-Tool
$29.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25
Crank Brothers m19
$32.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime
Crank Brothers F10+ Multi-Tool
$34.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - Magnetized storage case can be used as a handle for extra leverage - 5-year warranty
Crank Brothers F10+ New York Edition
$34.99
Folding flat to fit almost anywhere, the Crank Brothers F10+ features ultra-fine finishing and 10 fundamental tools fixed inside a magnetic case, stamped with NYC pride. Specs: - Case: Magnetized, built in bottle-opener - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Torx: T-25 - Warranty: 5 years - Weight: 94g
Crank Brothers F10+ Texas Edition
$34.99
Folding flat to fit almost anywhere, the Crank Brothers F10+ features ultra-fine finishing and 10 fundamental tools fixed inside a magnetic case, stamped with a Texas Star. Specs: - Case: Magnetized, built in bottle-opener - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Torx: T-25 - Warranty: 5 years - Weight: 94g
Crank Brothers Y15 Multi-Tool
$39.99
Thanks to the Y15 multi-tool from Crank Brothers, you don't have to be MacGyver to get yourself out of mechanical snafus on the road or trail. This compact carrying kit gives you the peace of mind to spend less time fiddling and more time riding. The Y15 includes: - patch kit - 8/9/10 speed-compatible chain tool - spoke wrenches (#0, 1) - hex wrenches (#2, 2.5, 3, 4, 5, 6, 8) - screwdrivers (Phillips #2, flat #2) - Torx drivers (T10, T25) Weight: 224g
Crank Brothers F15 Multi-Tool
$42.99
Thin, light and minimalist design. - 5-year warranty - Hex wrenches : 2, 2.5, 3, 4, 5, 6, 8mm - Screwdrivers : Phillips #2, flat #2 - Torx : t-25 - 8-12 speed chain tool is incorporated into the case - Spoke wrench : #0, 1, 2 & 3 - Magnetized storage case can be used as a handle for extra leverage
Crank Brothers F15 Syndicate Edition
$42.99
Folding flat to fit almost anywhere, the Crank Brothers F15 tool features ultra-fine finishing and fifteen fundamental tools fixed inside a magnetic case. Specs: - Case: Magnetized, built in bottle-opener - Chain tool compatibility: 8, 9, 10, 11, 12-speed - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Spoke wrench: #0, 1, 2, 3 - Torx: T-25 - Warranty: 5 years - Weight : 164g
Crank Brothers Y16 Tool
$44.99
- Shop quality tools use magnets to attach to the compact carrying frame - Features a CO2 inflator head and chain breaker - Driver bits attach to a 1/4" Driver on the Y-tool - Includes 2,2.5,3,4,5,6,8mm hexes, Torx T10 And T25, Phillips and flat screwdriver, spoke wrenches - 260G
Crank Brothers Y12 Multi-Tool
$50.00
When you're on the road or trail, the Y12 is your guardian angel. A compact frame packed with 12 shop-quality tools will save you from any mishaps with just what you need, but nothing you don't. The Y12 includes: - storage container for personal items - patch kit - hex wrenches (#2, 2.5, 3, 4, 5, 6, 8) - screwdrivers (Phillips #2, flat #2) - Torx drivers (T-10 and T-25) Weight: 166g
DMR Pedal Bearing Tool V12
$29.90
- bearing tool for Vault, V18, or V14 models
DT Swiss Internal Nipple Wrench
$21.90
- Professional wrenches fit internal nipples on many deep section aero rims
DT Swiss Aerolite Spoke Holder
$23.90
- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Anodized red handle for easy truing and building
Page 1 of 21 Next page