Yakima's RidgeBack 2 securely transports two bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
The SplitRail LS goes beyond just a hitch rack with a balance between aesthetics and functionality that is best in class. The SplitRail design puts everything in the right place, while visually creating a clean rack that will not distract from your vehicle's good looks. The largest carrying capacity, up to 4 bikes with Add-Ons, and the deep wheel wells make the SplitRail LS incredibly secure and versatile. Integrated locks keep your bikes safe for those quick trips, while the soft-touch hook arms keep it looking good without frame contact. Product Features: - Carries 2 bikes, up to 60 lbs each - Expandable to 3 or 4 bikes up to 45 lbs each, with Add-Ons - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 50-inch - Only available for 2-inch hitches. Uses our premium 3-axis anti wobble system - Tray can be adjusted 4-inch side-to-side to avoid bike interference - No contact with frame, secures bicycle by front wheel - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Only available for 2" hitches. Uses RockyMounts premium 3-axis anti wobble system - Integrated cable locks secure individual bikes to trays, locking hitch pin and premium lock pod secures rack to car, keyed alike - Includes wall hook for easy storage - Not for use with fender equipped bicycles - Rack weight 44 lbs (shipping weight 58 lbs)
Transport your recumbents and save your back, too, with Hollywood's Sport Rider Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. And, the Sport Rider folds up when not in use for easy storage and transportation. - Hitch Size: fits both 1 ¼ and 2-inch - Space between bikes: 18-inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 45 lbs per bike
Leave it to Hollywood to invent a clever way to carry your bikes on the same hitch-mounted rack system you use to pull a trailer. Their Tow 'n Go rack allows the hitch to perform double duty for travelers who like to bring their bikes as well as their boat, camper, or any other item pulled by the hitch. Plus, this sweet rack carries up to 3 bikes, which are secured by Hollywood's paint-job-friendly rubber stabilizer straps. - Requires additional parts to tow trailer (sold separately) - Weight Capacity: 35 lbs per bike - Weight: 25 lbs - Arms fold down when not in use - For 2-inch hitches only - Not to be used on any trailer, fifth wheel or towed vehicle
This add-on to Thule's premium T2 Pro XT platform hitch rack allows 4 bike capacity (2"/50mm receivers only). - Lock bikes to the rack with the integrated cable lock - Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts - Secure bikes quickly without frame contact with the frame free ratcheting arm - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters
You’re cruising down the road with your collection of bikes and make a pit stop to top off the tank. While at the gas station you want to grab a snack from the back cooler and let Rover out for a well…you know. You walk around to the back of your vehicle and realize that you need to unload all these bikes to get access to the hatch. Sorry, Rover. You’re out of luck. Now what if we told you there was a better way? An easier way. A hitch bike rack that lets you access the rear of the car in one step – both with bikes and without. Born in Saris' innovative labs in Madison, Wisconsin, the Glide EX does exactly this thanks to one-step glide action. Simply push the trigger to release the rack, and boom – hatch access. When you’re done, the same amount of (non) effort glides the hitch rack upright. Then you’re good to go, and Rover is too. Featuring easy-to-load bike hold downs, best-in-class ratchet straps and integrated locks, you can speedily fasten your bikes to the Glide EX and know they’re secure as you head toward your next adventure. - Convenient, one-step access to the back of the car - fully loaded with bikes or not. - Innovative four-bar linkage system controls the center of mass, creating a smooth, glide-action away from the vehicle. - Hanging hitch bike rack transports as many as 4 bikes, up to 35 lb. per bike. - Complete integrated security: locks the rack to the car and the bikes to the rack. - Style points: your choice of standard black, head-turning bronze and sapphire blue. - Hanging hitch style bike rack - Carries 4 bikes, up to 35 lb. each. - One-button glide action provides instant access to rear of vehicle, both with bikes loaded and without. - Innovative four-bar linkage system: centers bike mass for smooth, glide-action away from vehicle. - No assembly needed - Rack weight: 37 lb - Bike hold downs are easy to use and quick to load. - Best-in-class ratchet straps speedily fasten bike to the rack. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Built and tested to outlive the elements.
Premium aluminum platform bike rack is fully lockable, easy to use, and holds bikes without frame contact. Features - Securely holds bikes in place without frame contact - Quickly attach bikes and easily secure them to the rack using the ratcheting wheel loops - Aluminum construction makes it easy to use, install and remove - Effortlessly fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down, even with bikes on it - Lock bikes to the rack using the integrated cable lock (lock included) - Fits 26”-29” wheel sizes up to a 3” wide tire - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) Technical specifications - Max number of bikes: 1 - Load capacity: 37.5 lb - Max bike weight: 37.5 lb - Dimensions: 20.8 x 59.7 x 33.4 in - Folded dimensions: 12 x 59.7 x 17.8 in - Weight: 23 lb - Distance between bikes: 10 in - Carbon frame compatible - Tilt function (with bikes) - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included
Hollywood's Traveler racks get you traveling with all your bikes quickly and economically. The Traveler 4 carries 4 bikes and includes Hollywood's separators and anti-sway stabilizers, which makes mounting the bikes easy and protects them in transit. This versatile hitch-mount rack tilts down for easy rear access and the arms fold out of the way when the rack is not in use. Plus, Hollywood's No-Wobble Hitch holds the whole system steady even on bumpy roads. - Weight: 28 lbs - Max weight capacity: 35 lbs per bike - Not to be used on any trailer, fifth wheel, or towed vehicle
The WestSlope 3 is a wallet-friendly, feature-filled and clean platform hitch rack. The big brother to the WestSlope, just with the capacity for an extra bike. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 3 bikes, up to 40 lbs each - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Carries road tires up to 3.0” wide mountain bike tires, and diameters from 20” to 29” - Compatible with bicycles’ wheelbases from 34” to 48” - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - Fits 2” hitches only, with anti wobble bolt - Not for use with fender-equipped bicycles - Rack weight 43 lbs (Shipping weight 47 lbs) - WestSlope Lock Kit sold separately
The WestSlope is a wallet-friendly, feature-filled and clean platform hitch rack. The frame body is sloped to create a tiered mounting arrangement that eliminates handlebar interference between the bikes. By using a soft-touch wheel hook and a ratcheted swing arm, the WestSlope provides a secure fit with zero frame contact. - Carries 2 bikes, up to 40 lbs each - Tire Width: 19mm road bike tires - 3.0-inch mountain bike tires - Wheel Diameter: 20-inch - 29-inch - Wheelbase: 34-inch - 48-inch - Fits both 1.25-inch and 2-inch hitches with adapter sleeve & anti wobble bolt - Tiered mounting eliminates handlebar interference between bikes - No contact with frame, secures bicycle by front wheel - Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access - WestSlope Lock Kit sold separately
Hollywood's SportRider SE2 rack uses padded universal top clamps and adjustable wheel holders to safely carry 2 bikes. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. The rack folds up when not in use, tilts down for easy cargo access, and includes a keyed-alike locking hitch pin and security cable. Plus, with an add-on kit (sold separately), the Sport Rider SE2 can bring along 4 bikes for your adventures. • Hitch Size: 2 inches • Max tire width: 3 inches • Max bike wheel base: 60 inches • Max weight capacity: 45 lbs per bike • Weight: 45 lbs • Not to be used on any trailer, fifth wheel, or towed vehicle
For around-town jaunts and cross-country excursions, Hollywood's Road Runner 3 Extended is great for carrying three bikes. The extended 13-inch distance from the face of the hitch to the back of the rack allows it to fit around an external spare tire. Hollywood's rubber separators with integrated straps and a lower tie-down bar hold the bikes fast and ensure they won't bump each other. Even when loaded, this rack easily tilts out of the way for rear access, and it folds down when not in use. Plus, Hollywood's No-Wobble system eliminates slack between the hitch and rack for extra stability. The Road Runner 3 also includes a keyed-alike locking hitch pin and 8-foot locking cable for total security and convenience. • Weight: 33 lbs • Max weight capacity: 35 lbs per bike • 13 inches from face of hitch to the back of the rack • Not to be used on any trailer, fifth wheel, or towed vehicle
Hollywood's Sport Rider for Electric Bikes uses padded universal top clamps and adjustable wheel holders to safely carry 2 electric or standard bikes. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. The rack folds up when not in use, tilts down for easy cargo access, and includes a keyed-alike locking hitch pin and security cable. - Hitch Size: 2 inches - Max tire width: 3 inches - Max bike wheel base: 60 inches - Max weight capacity: 80 lbs per bike - Weight: 68 lbs - Not to be used on any trailer, fifth wheel or towed vehicle
This is perfect for the commuter or rider who only needs to carry one bike. It is light at 25lbs, compact, easy to store & easy to use. RockyMounts includes both 1.25" and 2" components in the box, so it will work with either hitch receiver sizes, as well as their anti-wobble locking hitch bolt to keep the rack both tight and secure. The rack includes locks for locking the rack to the car and the bike to the rack with the convenience of one key. It folds flat against the car with a quick release handle and the bike easily loads with our platform wheel trays and ratcheting arms. If you do need to carry a second bike down the road, RockyMounts' MonoRail Add-on can be installed by removing the end cap and attaching with two bolts. It is simple to go back and forth between 1 & 2 bike configurations. Carries kids bike with 20" wheels up to adult 29" wheels up to 48" wheelbase. Carries Fat Bikes up to 5" tires providing enough clearance for RockShox Blutos & the new 197mm rear axles.
Customize Your Hauling Capacity No ride or trail is exactly alike – so why is your rack setup the same no matter what? Put the MTR’s “modular” moniker to use with the 2-bike Add-On. The 2-bike Add-On is made from the same rugged, American-made aluminum and steel, which are tested to outlive the elements. It’s compatible with both 1-bike and 2-bike models and lets you haul more bikes to fit the day’s adventure – and maybe bring some friends along for the ride. Product Features - Bike tray add-on for MTR 1-bike or 2-bike tray-style hitch rack. - Built with American-made aluminum and steel. - Nesting wheel trays speed up bike loading and unloading process. - Wheel trays and dual-arm wheel holders securely transport variety of bikes. - Hauls bikes up to 60 lb if used as first two trays closest to vehicle; or up to 35 lb if used as third or fourth tray. - Bike tray add-on for the MTR platform hitch rack. Compatible with both the 1-bike and 2-bike base. - Carries 2 bikes, up to 60 lb each when used in the first two positions closest to the vehicle. When used in positions furthest from the vehicle, trays can hold bikes up to 35 lb. - Minimal assembly required. - Rack weight: 50 lb. - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Integrated locking cable secures bikes to the rack. - Hitch compatibility will depend on MTR base unit. - Built and tested to outlive the elements.
Yakima's TwoTimer hauls two bikes of virtually any style, from children's bikes to big DH bikes to fat bikes. • Transport two bikes regardless of frame design, suspension or wheel size • Ideal for fat bikes, kids' bikes, and fenders • Secures bike by the frame with padded arms • Fits 1 ¼" or 2" hitch receiver right out of the box • Low tray height for quick and easy loading and unloading of bikes • Folds down with bikes loaded for rear-of-vehicle access. Folds up when not in use
Light, strong, and always ready to roll, the SingleSpeed hitch rack is built for solo travel. Ready for any kind of bike – road, mountain, fat, or BMX – the StrongArm hook ensures your bike is secure and protected, holding the bike tight by the wheels, and babying those carbon frames and painted surfaces. The locking SpeedKnob makes install a breeze & an integrated SKS bike lock is included to keep your two wheeler secure. - Light, compact, and built for one bike, this hitch rack makes for quick & easy solo travel - Lightweight, hitch mounted tray rack that carries one bike without frame contact - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - Folding wheel cup and compact design keeps the rack out of your way when not in use - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, & BMX - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20” to 29” wheel sizes and tires up to 5-inch wide - Integrated SKS (Same Key System) lock included for added bike security - Fits both 1.25-inch & 2-inch hitch receivers right out of the box
Yakima's HitchSki is an attachment for your hitch-mounted rack (sold separately) that enables you to carry skis and snowboards. Simply swap the HitchSki for your bike attachment and you now have a rack that can be used year-round. It hauls up to six pairs of skis or four snowboards without the risk of damage thanks to rubber-padded arms. And, Yakima's SKS locks are included to prevent theft.
The Current is our heavy-duty rack which allows for use on either 1-1/4" or 2" hitch receiver. It also has a higher weight capacity per bike at 60lbs, making it e-bike approved and also accommodating Fat Tire bikes with tire widths up to 5"! The Current comes with locking ratchet hooks and a locking hitch pin to keep your bikes and rack secured to your vehicle. It has the ability to tilt away from your vehicle with bikes mounted for rear vehicle access, and it folds up when not in use. This rack is everything you need all in one! - Carries: 1-2 bikes - 1-1/4" or 2" hitch receiver - Weight capacity: 60lbs per bike - Fat Tire bike-compatible up to 5" wide - Tilts and folds away from vehicle while bikes are loaded - Includes locking threaded hitch pin - Rack weight: 59lbs
Lightweight aluminum hitch bike rack provides outstanding bike protection and easy-on, easy-off convenience. Features - Super lightweight aluminum construction is half the weight of steel hitch bike racks, providing easy installation, removal, and handling - Unsurpassed hanging hitch carrier bike protection with industry-leading 7" spacing between bikes - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Convenient access to rear of vehicle - HitchSwitch feature allows rack to be easily tilted down - Complete bike security with integrated cable lock (lock included) - Quick, secure and confidence-inspiring bike attachment with ratchet strap cradle strap - Easily fold down bike arms when not in use with conveniently located HitchSwitch lever - Compact cradle design accommodates wide variety of bike sizes/frame styles - Fast, tool-free installation with SnugTite stinger design delivering maximum speed, stability and security (lock included) - Transferable between hitch receivers, fits 1.25" and 2" hitches Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 32 x 11 x 37.3 in - Folded dimensions: 20.7 x 11 x 37.3 in - Weight: 19 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included
RockyMounts employed components from their SplitRail to develop the MonoRail. The MonoRail carries two bikes with an option for a third bike (2-inch model only) for up to three-bike capacity. It holds everything from kids, road, mountain and fat bikes without missing a beat. - 39 lbs assembled weight - Simple 5 minute assembly - Fits bikes 20-inch to 29-inch wheels, road to fat bike tires 5-inch wide and 197mm rear spacing - 13-inch spacing between bikes and 3" side-to-side adjustment provides plenty of room between bikes - Handle located at end of rack for use, stowed and folded away positions - Max weight 60 lbs per bike, 120 lbs per rack - No bike frame contact, hook clamps front wheel - CRMO hitch tube is light weight and corrosion resistant - Included locks, bike to rack, rack to car with same key - Anti-wobble hitch pin keeps the rack solid and secure
Nothing beats Hollywood's Trail Rider for fast, simple loading/unloading of bikes. It fits almost any style of bike using a padded universal top clamp and adjustable wheel holders. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. Plus, this rack folds into a thin profile for garage storage and includes Velcro wheel straps that also fold easily when not in use. - Hitch Size: fits both 1-¼ and 2-inch - Max bike wheel base: 60 inches - Max tire width: 3 inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 50 lbs per bike - Optional locking hitch pin and cable sold separately
Kuat's Beta is a lean, mean rack that carries two bikes (up to 80 lbs. total capacity) and weighs in at just under 14 lbs. - Carries 2 bikes (up to 40 lbs. each) - Total carrying capacity of up to 80 lbs. - Folds up quickly for storage - Tilts down for easy vehicle access - Enhance the Beta with hitch lock system (sold separately) - Hand-tight cam system - no need for additional tools! - Anti-sway carriages for a smooth ride - Aluminum construction is lightweight and extremely durable - Gun Metal Gray powder coat finish - 2-inch weighs only 12 lbs. (lightest weight on the market) - 1.25-inch weighs only 14 lbs. (additional 2lbs due to steel lower end) - Available for 2-inch OR 1.25-inch receivers. The 1.25-inch Beta can fit either hitch size with the 1.25-inch to 2-inch adapter.
There are over 50 new SUVs, mini-vans, and hatchbacks that trunk racks won't fit due to possible spoiler damage...until now. Hollywood's Over-the-Top 3 bike rack carries 3 bikes and features an adjustable high rise frame which prevents strap contact with the spoiler. It includes removable hatch anchors and quick-connect straps for secure attachment to hatches, trunks, roof rack cross bars, and roof rack raised rails. In addition to fitting most vehicles without a spoiler, it also folds flat when not being used.
The Rack Valet is the first mobile bike rack storage and transportation system. Easily attach your bike rack into either the 1-1/4" or 2" slot on the rack valet and then roll it out to your vehicle. Some bike Racks can weight up to 90 pounds, so save yourself the trouble (and back pain) and roll your rack right out to your car.
Swagman's Escapee is E-bike friendly and approved for use with RVs. It's a two bike, platform style bike rack that's designed for heavy-duty use; each bike tray can accommodate a bike weighing up to 60 lbs. Locking ratcheting arms with replaceable keys help to prevent bike theft. - Fits 2" hitch receivers - Zero frame contact - Fits 20" - 29" wheel sizes up to 3" wide - Fits most frame sizes, shapes, and styles - Designed for heavy duty use (E-bikes up to 60 lbs) - Comes with a threaded locking hitch pin - Rear wheel ratcheting straps firmly hold bikes and secure wheels - Max. load: 60 lbs. per bike
Transport your recumbents and save your back, too, with Hollywood's Sport Rider Heavy Duty Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. Plus, the Sport Rider folds up when not in use for easy storage and tilts down so you can access the rear car door. - Hitch Size: 2 inches - Space between bikes: 18 inches - Not to be used on any trailer, fifth wheel, or towed vehicle - Max weight capacity: 45 lbs per bike - Includes a keyed alike locking hitch pin and security cable
Choose your own adventure with the MTR 1-bike hitch rack. Whether you’re feeling me-time or party time, the MTR can adjust for any occasion. The secret is in the MTR’s modular design (after all, MTR stands for “Modular Tray Rack”). Simply add or remove trays to securely haul between one and three bikes to wherever the trail may lead. When you’re ready to hit the road, feel free to take the scenic route. Rugged enough to handle the harshest of environments, the MTR is built with American-made steel and aluminum. Complete with versatile and sleek nesting trays with dual-arm wheel holders, the MTR can carry nearly any rig – from Junior’s MTB to downhill to your favorite eBike – securely, in style and without ever coming into contact with your bike’s frame. The Saris MTR also available in a 2-Bike version. Product Features - Modular: carries 1 bike, up to 60 lbs, and can be customized with Add-On to transport up to three bikes. - Pivot Away: unique wheel trays pivot and nest for easy loading and compact storage. - Dual-arm holders are compatible with a wide range of tire sizes and never touch the bike's frame. - Full Tilt: tilting feature allows easy hatch access without removing bikes. - Complete Integrated Security: locks the rack to the car and the bikes to the rack. - Tray-style hitch bike rack. - Carries 1 bike, up to 60 lb. - Customizable to carry more bikes with 1-Bike Add-On and 2-Bike Add-On - No assembly needed. - Tool-free installation. - Rack weight: 35 lb - Adjustable wheel block to accommodate wheel sizes from 20 inches up to 29 inches and tire sizes as wide as 5 inches. - Easily folds up when not in use. - Integrated locking cable secures bikes to the rack. - Locking hitch pin secures rack to the car. - Accommodates wheel bases up to 53 inches. - Universal hitch: fits 1 ¼” and 2” hitches out of the box. - Constructed from American-made aluminum and steel, and tested to outlive the elements.
Hollywood's Traveler racks get you traveling with all your bikes quickly and economically. The Traveler 3 carries 3 bikes and includes Hollywood's separators and anti-sway stabilizers that make mounting the bikes easy and protects them in transit. This versatile hitch-mount rack tilts down for easy rear access and the arms fold out of the way when the rack is not in use. Plus, Hollywood's No-Wobble Hitch system holds the whole system steady even on bumpy roads. And, with the universal heavy-duty metal hitch insert, the Traveler 3 fits 1 1/4- and 2-inch hitches so you can use your rack on different vehicles. - Not to be used on any trailer, fifth wheel or towed vehicle - Weight: 27 lbs - Max weight capacity: 35 lbs per bike
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
Page 1 of 1