Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Pedals

iSSi Stomp
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. Available in two sizes, Standard for most riders, and an XL version for folks seeking the maximum contact patch. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 102 x 18mm (XL) - Platform size: 120 x 95 x 18mm (Standard) - 64.5mm spindle length (XL) - 57mm spindle length (Standard)
iSSi Thump (Molded Pins, Small)
$40.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough, nylon composite body - Chromoly spindles, sealed cartridge bearings and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 113 x 95mm
iSSi Trail III Pedal
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Xpedo Spry Pedals
$79.00
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Origin8 Ultim8 Slimline Platform
$76.99
Origin-8's Ultim8 Slimline Platform pedals feature ultra-light and thin forged 6061-aluminum platforms, heat-treated chromoly axles, and cartridge bearings for a super grippy, ultra-smooth, lightweight and reliably tough set of pedals. They also have replaceable pins. - 9/16-inch - Weight: 276 grams
Crank Brothers Mallet Enduro 11
$350.00
The Crank Brothers Mallet E 11 is the premium version of the ideal enduro racing pedal. The specs say it all. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 6 adjustable pins per side for grip - Traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 52mm q-factor for maneuverability on tight trails - Hex alloy endcap for durability - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system
Eclypse Switch Tour Pedals
$59.99
- Flip/Flop Clipless and Flat Design - Tough Aluminum Body and Cage - Smooth Rolling, Sealed Bearing and Bushing System - SPD Compatible (SH-51)Cleats Included - Adjustable Tension with 4° Float
Crank Brothers Candy 2
$99.99
Crank Brothers' most versatile pedal. The Candy excels at it all — cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged scm 435 chromoly steel Body material: 6061-T6 aluminum Wing material: Stamped steel Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 355g per pair Warranty: 5 years
iSSi Flip II Pedals
$80.00
There’s no need to choose between clipless performance and platform versatility with iSSi's Flip II pedals. Go clipless on the commute or sport clogs on campus. - Flip II: 56.5mm spindle length - Wear 2-bolt style cycling shoes or casual flat shoes - Compatible with iSSi, Shimano SPD, and Wellgo 98A cleats - Chromoly spindle, ED-coated - Standard 15mm wrench flats as well as 8mm hex broach - Black chrome hardware - Adjustable spring tension - 4° cleat float - 14.6° angle of release - Bushing/sealed bearing combination for low-maintenance durability - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch
Crank Brothers Candy 3
$135.00
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
iSSi Flash II
$85.00 - $90.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi Flash III
$105.00 - $110.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
Origin8 Leather Toe Clip Straps
$41.99
Origin-8's Leather Toe Clip Straps are made from real, high-quality leather and feature the classic, double strap design.
Sunlite Classic Rubber Pedals
$23.99
- Rubber platform increases comfort and grip - With reflectors
Origin8 Rascal Platform
$79.99
Extruded & CNC machined 6061 aluminum pedal body - 2 sealed bearings & 1 DU sleeve bushing - 9/16" CNC chromoly spindle - 98mm x 92mm x 14mm platform - Extra tall 7mm M4-10 SS replaceable pins for ultimate grip
Sunlite 747 Bear Trap Pedals
$30.59
- Forged alloy body and cage - Oversize oval design - Chromoly spindle - Toe clip compatible - 467g pair
Fyxation Gates Pedal Strap Set
$43.95
- Wide and durable, 2-inch reinforced nylon seat-belt webbing upper strap with a smooth metal sizing buckle and 1-inch dual/lower run-through straps for retention control and comfort - Minimalist styling and extra-Long top strap will adjust to fit most uses, While stiffer lower straps help retain shape for easy in/out - Fits gates and other platform pedals with larger side-port openings (Sold as a set for 1 pair/bike's worth of pedals)
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Crank Brothers Double Shot 3 Pedals
$125.00
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel
Fyxation Gates Slim Nylon Platform Pedals
$29.95
- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g
Origin8 Pro Track Light Pedals
$27.99
Origin-8's Pro Track Light Pedals boast durable chromoly axles with reliable ball bearings. They feature an aluminum body and a toe-clip compatible aluminum cage, and tip the scales at 360 grams a pair.
Race Face Aeffect Pedal Rebuild Kit
$24.99
Rebuild kit for Race Face Aeffect pedals.
Shimano PD-M545 Pedals
$124.99
Shimano's M545s are great for blasting BMX courses, dual-slalom runs and technical trails. They boast large toothed platforms that grip non-cleated shoes for top-notch control and comfort. Plus, there are Shimano SPD bindings, too, to grab your cleated shoes for cross-country use, and they're angled for easier entry. These pedals feature rugged chromoly axles and durable sealed-cartridge bearings, too. - Weight: 567 grams (pair)
Crank Brothers Traction Pads for Mallet E
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Origin8 Ultim8 All-Mountain Double Clipless Pedals
$87.99
Origin-8's Ultim8 All-Mountain Double Clipless Pedals are great clipless pedals that are easy to enter and exit. They boast dual-sided SPD compatible bindings and a composite cage for increased surface area. The bindings are adjustable for dialing in the perfect entry and exit tension and these sweet pedals have a mud-shedding design to prevent clogging. They feature chromoly axles and sealed cartridge bearings for durability, too.
Sunlite Alloy Folding Pedals
$31.99
- 9/16" Boron axle - Alloy body and cage - 2 DU sleeve bearings - Size: 105mm x 84mm x 28mm - 435 grams per pair
Origin8 SPD Cleats
$16.99
Origin-8's SPD Cleats are compatible with Shimano SPD-style pedals. These cleats are single release.
Crank Brothers Pedal Refresh Kit - Eggbeater 11/Candy 11
$24.99
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
Origin8 Split KEO Cleats
$19.99
LOOK KEO compatible road cleats - Unique 2-piece design allows you to change cleats without losing position - Durable, high-traction walking surface - Hardware included
iSSi Cleat Set
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
Look Keo Cleat Covers
$15.00
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
Power Grips Sport Pedal Kits
$49.95
Power Grips Sport Pedal Kits include black Power Grips attached to a pair of quality, metal cage pedals. - Offers increased pedal power and exceptional durability at a low price point - Pedals feature a resin body with steel cage, ball and cone bearings, forged spindle, and a wide platform - The pre-set adjustable bracket easily adjusts to fit different shoe sizes with a Phillips screwdriver and 8mm wrench - 9/16"
iSSi Spindle Rebuild Kit
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
iSSi Keo Compatible Cleat
$25.00
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
HT Pedals X2 DH Race Pedals
$169.00
To create its new X2 DH clipless pedals, HT Components started with the effective design of its X1 downhill pedals. The X1's platform was altered to make the X2's easier to get in and out of with a wider variety of shoes. The X2 uses a thinner, 14mm platform than the X1's to allow them to be more responsive, and it uses a slimmer cage design on the CNC-machined body. - Platform:85 X 94 X 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
Spank Oozy Trail Pedals
$129.00
- A super slim 12mm for maximized pedal clearance, weight optimized trail pedal at 360g per set. - Forged alloy body is shot peened and anodized for increased durability - Equipped with forged hollow taper chromoly steel axles for unmatched strength - Sealed bearings, IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip and stability on trails - KEY TECHNOLOGIES: MGR, industrial grade axle assembly, chamfered leading edges - MATERIAL: Forged MGR alloy body, CNC optimized - PLATFORM SIZE (mm): 100 x 100 - PLATFORM PROFILE (mm): 12 - WEIGHT (g): ±360 / Set - AXLE: Cold forged chromoly steel - BEARING / BUSHING Full complement industrial sealed bearing, IGUS bushing - PINS: 18 steel pins (per pedal) - virtual concavity configuration - FINISH: Shot peen anodized, CNC logos
Crank Brothers Pedal Refresh Kit - Stamp
$24.99
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
Ritchey WCS Carbon Echelon Pedals
$149.95
The world-beating performance of the Echelon just got better, thanks to the addition of a high-strength carbon fiber body that drops this already lightweight pedal down to an incredible 220 grams a set. The WCS Echelon Carbon pedal offers a proven pedal design in a lightweight, reasonably-priced package. This Keo-compatible pedal features a combination of bushings and bearings for extremely long life, adjustable spring tension and a composite body and high-strength carbon claw, and a low-profile cleat/pedal interface for maximum pedaling efficiency. The pedal's lifespan is also increased thanks to a sealed cartridge outer bearing. A stainless steel cleat promises excellent wear and no noise. The Echelon Carbon also offers adjustable tension with extra-strong springs for powerful riders. Works with Ritchey or LOOK Keo cleats. - Body: Carbon thermoplastic - Axle Material: CroMo - Claw: Carbon reinforced thermoplastic - Inner Bearing: Bushing - Middle Bearing: Needle - Outer Bearing: Sealed Cartridge - Float: 7 degrees - Finish: UD matte carbon - Weight: 220g
Xpedo CXR Pedals
$109.00
The CXR is the ultimate performance cyclocross pedal for riders looking for lightweight, durability, and strength. The Posi-Lock retention system allows superior adjustability and easy rapid engagement action. Specially designed larger front retention claw maximizes positive entry in wet and muddy conditions. Cromoly spindles are paired with three precision cartridge bearings for minimal maintenance. - Weight: 295g  - Body: 6061 Forged Aluminum - Spindle: Cromoly  - Bearings: 3 Cartridge  - Springs: SWP  - Cleat: XPEDO XPT (6° Float) 
Chromag Contact Axle Kit
$30.00
Replacement axle kit for Chromag Contact pedals.
Look S-Track Cages
$29.99
Look's S-Track Cages increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. They give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Compatible with Look S-Track pedals (sold separately)
Sunlite Leather Toe Straps
$9.99
• Real leather material • Classic design fits most caged pedals
All-City Standard Track Pedal
$29.99
• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design
VP Components VP-Vice Pedals
$103.99
VP's Vice pedals are nice, flat pedals that perform and look great. They have large platforms and are low-profile reducing impacts with rocks and roots if you use them off-road (they're perfect for BMX and other bikes, too). They have 12 pins per side so they grip no matter what, and they feature extruded/CNC-machined aluminum bodies with heat-treated chromoly axles and sealed bearings for durability. - 406 grams - 9/16" axles
Sunlite Non-Slip Pedals
$9.99
- One-piece resin body with rubber surface for grip - Boron spindle - 400g pair
Sunlite Racing Toe Clips
$16.99
- Steel - Quality leather straps included
Spank Spike Flat Pedals
$119.00
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
Ritchey Comp XC Pedals
$59.95
The Comp version of Ritchey's world-beating Paradigm pedal has been redesigned from the ground, up. New engagement system provides best-in-class entry and release and excellent mud-shedding characteristics. The revamped axle system offers even greater bearing life, and a wider body improves stability. - Body: Cast alloy - Axle Material: CroMo - Inner Bearing: Ball bearing - Outer Bearing: Ball bearing - Float: 4 degrees - Weight: 331g
Shimano Shimano SH45 SPD-SL Cleats Covers
$17.99
- Fits SPD-SL cleats - Cleat Bolt Pattern: 3-Bolt
Crank Brothers Shoe Shields
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
iSSi Thump (Molded Pins)
$40.00
The concave shape and tall pins of the Thump composite pedal provides a "just-right" amount of traction—enough for the rigors of riding off-road—but with nylon pins to keep calves laceration-free on more casual rides. Two different platform sizes accommodate feet from small to Sasquatch. - Tough nylon composite body - Chromoly spindles, sealed cartridge bearings, and nylon bushings - Body: 18.5mm thick with 2.5mm of concavity for great control and pedal feel - Platform size: 119 x 99mm
iSSi Road Carbon Pedals
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams
Spank Spoon Pedals
$95.00
SPANK Industries set out to make the perfect pedal for every rider, and the SPOON Pedals offer three platform width options for riders of any age or foot size. The SPOON 90 Pedals are the perfect solution for younger riders and many women who have compromised ideal support and grip with traditional size flat pedals. SPANK SPOON 100 Pedals are ideal for riders with average sized feet who want a flat pedal upgrade that won't break the bank. The extra wide pin pattern on SPANK's SPOON 110 Pedals spread load around the perimeter of large sized shoes, offering more predictable grip and enhanced support over traditional size flat pedals. Each SPOON pedal sports a 16mm-12mm concave profile lined with 20 steel pins, as well as a forged chromoly axle which delivers the strength and durability SPANK pedals are famous for. - SPOON 90 Pedals: US Men size 6 (Euro 39) and under; ±360g /set - SPOON 100 Pedals: Men sizes 7 to 10 (Euro 39-44); ±400g /set - SPOON 110 Pedals: US Men sizes 11 (Euro 44) and up; ±420g /set - Industrial grade axle assembly - Chamfered leading edges - MGR extruded, CNC optimized alloy body - 12-16mm concave platform profile - Cold forged chromoly steel axle - Industrial sealed bearing and IGUS bushing - 20 steel pins per pedal - Shot peen anodized finish with laser logos - Available in Black, Red, Blue, Green - Suitable for Kids, Race, Freeride, Trail
iSSi Trail I
$70.00
iSSi's Trail pedal provides a wider platform, solid pedal contact, and mechanism protection for the rigors of cross-country and all-mountain riding—the iSSi Trail pedal provides the rider with more control and more confidence when the terrain gets tough. - Chromoly spindle, ED-coated - 8mm hex broach - 52.5mm spindle length - SPD Compatible - Black chrome hardware - Adjustable spring tension - 4º cleat float - Compatible with two-bolt style shoes - Two-sided clipless pedal
Dimension Pro Toe Straps
$9.99
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 440mm length
iSSi Flip I
$60.00
There’s no need to choose between clipless performance and platform versatility with iSSi Flip pedals. Go clipless on the commute or sport a pair of clogs around campus. - Compatible with SPD pedals & cleats - Compatible with two-bolt style shoes - Clipless on one side, platform on the other
Crank Brothers Pedal Refresh Kit - Doubleshot
$24.99
A revolution in performance and reliability. - The kit includes premium internal components: - Inner spindle seal x 2 - Outer spindle seal x 2 - Inner Igus solid bearing x 2 - Outer Enduro cartridge bearing x 2 - Spindle nut x 2 - Outer bearing carrier x 2 - Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)
Look Keo Cleats
$25.00
Look's replacement cleats for their classic Keo pedals are made of polyamide nylon with Teflon toe and heel inserts for easy entry/exit, efficient pedaling, and long-lasting durability. Molded wear indicators tell you when it's appropriate to replace your cleats. - These cleats are compatible with Look Keo pedals (sold separately).
Fyxation Gates Nylon Platform Pedals
$19.95
- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g
HT Pedals T1-SX BMX-SX Pedals
$175.00
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. - 68 x 84 x 17mm - 9/16"
Page 1 of 4 Next page